Here you can find useful tips and techniques, how-to videos, your product manual and more.
If you cannot find the answer to your question below, please email our Customer Support team.
The Contour Sander fits most 4″ (100mm) and 4 1/2″ (115mm) angle grinders. However, when choosing an angle grinder to suit the blade, you should look for the following features:
The Contour Sander can be used on a variable speed, cord, or cordless grinder, as long as it runs at a speed of 9000 RPM or higher.
Possible cause: Incorrect thread or adapter Solution: Check thread, locate the correct adapter
Possible Cause: Excessive flexing of the rubber pad in deep contours Solution: Use a plastic flange to hold either the paper or cloth discs.
Possible cause: Shaft axis not aligned correctly with grinder spindle Solution: Check that the extension shaft has fully tightened to the base of the grinder spindle. Do not use the base collar nut that is usually used to locate a grinding disc.
Possible Cause: Grinder spindle not accurate Solution: Try on another grinder
Absolutely! Refer to this video on how to make your sanding pads.
Get the latest news and exclusive offers