1) Junior’s first step was to rough out the centre of the burl with the TURBO Plane checking the depth regularly so as not to go through. Then sand the outside and Junior used the Contour Random Sander. He then started planning down the piece of Olive wood to eventually make a cylinder for the stand which he then sanded.
Winners of the Arbortech Staff Woodworking competition 2015
Winner of the judging Panel Prize was won by Junior Linke (Blade supervisor) for his lamp which he called “Natural Light”. Junior was inspired to make this after seeing a guy carve a cowboy hat in the States while working at a Wood Show. He used a lovely Mallee Burl piece for the shade which is a very hard West Australian wood and a piece of Olive wood for the base and centre pole.
2) Once he was happy with the thickness of the burl shade he used the TURBO Plane to start taking the thickness down. The best outcome would be to end up with a very thin layer of wood which will allow enough light to penetrate when illuminated.
3) After sanding the inside of the shade, Junior then started work on the base of Olive wood. He basically followed the shape of the wood using the TURBO Plane and TURBO Shaft before sanding off with the Contour Sander. You might also notice his very inventive way of holding the shade in place which was scraps of high density foam glued together with the basic shape left hollow and a great “clamp” for the shade.